Combining all of the best elementsWINDOW FILMS

FUSION Safety (Security) and Protective Film

Safety and protective film by FUSION is a cost-effective solution for providing additional protection to people, buildings, property, valuable equipment and materials. This film is completely unobtrusive, yet very durable. It is made from high quality polyester materials with high transparency, and is usually colourless. Protective film may also be dyed or metallized in order to increase its protective and anti-solar efficacy.

The primary function of safety and protective film by FUSION is maximum safety and protection of a person’s life, health and property. It retains 99% of harmful UV rays, protecting not only your property and interiors from premature aging, but your own health as well. This film can also be retrofitted to almost any type of glass.

By installing safety film you can transform ordinary glass into highly resilient safety glass, protecting you from robberies, vandalism, assault, shock waves from explosions, as well as the elements.

Glass is all around us. However, it is very fragile and breakable, causing dozens of preventable and unnecessary deaths every year (especially children), as well as hundreds of permanent injuries caused by broken glass. Most often these injuries are on the most visible of body parts- the hands and face. That’s why it is so important to eliminate these risks in advance and secure the glass in time. Safety and protective film by FUSION significantly reduces or even eliminates these risks entirely. In order to prevent these risks in a timely fashion, the safety and protective film should be installed first and foremost in areas frequented by young children (schools, pre-schools, medical centres etc.). It is equally important to secure areas frequented by large groups of people (shopping centers, airports, train stations, public buildings, hotels, restaurants, sports facilities etc.).

Advantages of FUSION Safety and Protective Film

  • Reduces the risk of robberies or accidental glass breakage, as even after breakage, the glass remains an impenetrable barrier
  • Protects against injury from broken glass
  • Prevents broken pieces of glass from spilling out, in case of breakage the glass remains intact
  • Prevents objects from breaking through the glass
  • Protects against the effects of shock waves
  • Retains 99% of UV rays
  • SMC AX safety film is certified under EN 356 in the P2A safety category
  • Recommended and acknowledged by insurance companies
  • SMC 4 protective film is certified according to EN 12600 in the category 2(B)2
  • Can be retrofitted to existing glass, glass replacement is not necessary
  • Hardened, anti-abrasion layer, routine maintenance
  • Health certificate permitting interior use including food establishments

FUSION Safety and Protective Film Maintenance

The film does not require any special maintenance. It can be washed using standard procedures, but no earlier than 30 days after installation (i.e. after it has completely dried and set). The exterior or outer side of the glass can be washed immediately. Washing can be done using water and detergent liquids and a soft cleaning cloth, paper towels, sponges and rubber squeegees.

The film cannot be washed using thinners, solvents, chemical solutions or corrosive substances. Make sure not to use any scrapers, screwdrivers, steel wool, and other similar tools that may damage the surface of the film.

The SMC Film Line

  • Transparent, colourless film
  • Various thicknesses and functions
  • Very firm and resistant to breakage
  • Long-term availability of the following types: SMC 2, SMC 4, SMC 7, SMC 8 a SMC AX (12)
  • Health certificate permitting interior use including food establishments

SMC AX (12)

  • The strongest safety film, 12 mils. thick (300 microns 0.3 mm). Is made of several layers of high-strength polyester, is transparent and colourless. Has multi-laminate surface treatment, making it scratch resistant.
  • SMC AX safety film meets the toughest criteria for safety and protection and the protection of persons and property.
  • Is certified in the resistance safety category EN 356 P2A for 4 mm glass, is acknowledged and recommended by insurance companies in the Czech Republic.
  • Available in widths 1.52 and 1.83 m and windings of 30.5 and 15.25 m (regular).
  • Is used primarily for securing premises against forced entry and burglary.
  • Is installed on the inner side of the glass.
  • Most common use – shop windows, all windows and glass surfaces of houses and flats, offices, government buildings, banks, manufacturing plants, as well as skylights and balcony doors.

SMC 2

  • The thinnest protective film at a thickness of 2 mil (50 microns, 0.05 mm). Is transparent and colourless, has a hardened, anti-abrasion layer.
  • Used as a protective film to prevent glass spillage, intended for automotive glass as well.
  • Due to its highly effective UV filter (retains 99%) it is often used as protection against harmful UV rays.

SMC 4

  • The most widely used protective film with a thickness of 4 mil (100 microns 0.1 mm). Is transparent and colourless and has a hardened, anti-abrasion layer. This film is most often used for glass reinforcement and as protection against glass spillage after glass breakage and against potential injury as a result of glass breakage. It is also widely used in the manufacturing process, particularly during the manufacturing of food products. This film protects glass surfaces in the event of glass breakage so that broken glass does not spill out and contaminate the products, thus preventing possible health hazards.
  • Is also used a safety film on automotive glass.
  • Is certified in the resistance safety category EN 12600 2(B)2 for 4mm glass.
  • Is installed on the inner side of the glass.
  • Available in widths 1.52 and 1.83 m

SMC 7

  • Reinforced film with a thickness of 7 mil (175 microns, 0.175 mm). Is transparent and colourless and has a hardened, anti-abrasion layer. This film is most often used for glass reinforcement, for securing premises against forced entry and as protection against glass spillage after glass breakage and against potential injury as a result of glass breakage.
  • It is suitable first and foremost for high-risk areas in order to prevent injury caused by broken glass.
  • Is installed on the inner side of the glass.
  • Available in widths 1.52 and 1.83 m

SMC 8

  • Reinforced film with a thickness of 8 mil (200 microns 0.2 mm). Is made of several layers of high-strength polyester, is transparent and colourless. It has a hardened, anti-abrasion layer. Its usage is similar to the above-mentioned film, SMC 7. It is most often used for glass reinforcement, for securing premises against forced entry and as protection against glass spillage after glass breakage and against potential injury as a result of glass breakage.
  • It is suitable first and foremost for high-risk areas in order to prevent injuries caused by broken glass.
  • Is installed on the inner side of the glass.

SMC 4 xt

  • Is the only exterior protective film with a thickness of 4 mil (100 microns, 0.1 mm). It is transparent and colourless and has a hardened, anti-abrasion layer. It is most often used for glass reinforcement and as protection against glass spillage after glass breakage and against potential injury as a result of glass breakage. It is most commonly applied to glass facades as protection against injury for passersby in case of glass breakage.
  • Is installed on the inner side of the glass.

The SMS Film Line

  • Reflective silver foil, metallized
  • Varying thicknesses and light transmission
  • Combined protective and solar control functions
  • High strength and breakage resistance
  • SMS 4 - Always in stock
  • Health certificate permitting interior use including food establishments

SMS 4

  • Silver, reflective protective film with a thickness of 4 mil (100 microns, 0.1 mm) and 18% light transmission. Combined protective and solar control functions. Has high UV protection, retains almost 80% of UV rays.
  • Is suitable for preventing spillage of broken glass, injury caused by broken glass or contamination of production whilst providing protection from overheating.
  • Is installed on the inner side of the glass.

 

Type
Color Visible Light Transmitted Total  Solar Energy Rejected Thickness Certificate
SMC 2 clear, safety 88% 18% 2 mil, 50 um  
SMC 4 clear, safety 90% 15% 4 mil, 100 um EN 12600 2(B)2
SMC 7 clear, safety 88% 18% 7 mil, 175 um  
SMC 8 clear, safety 87% 17% 8 mil, 200 um  
SMC AX (12) clear, SAFETY 88% 16% 12 mil, 300 um EN 356 P2A
SMS 4 reflective silver, safety 18% 79% 4 mil, 100 um  
SMC 4 xt clear, safety - exterior 90% 17% 4 mil, 100 um  

 

Demand form

Your name:
Your e-mail:
Text message:



Distributor

Username:
Password: